2022 Brockway 100
| Category | All Mountain On & Off Trail | |
| Snow Types | Crud/Variable, Powder, Groomed, Spring Corn | |
| Terrain | Open Runs/Trails, Bowls, Moguls |
The Brockway 100 is the ski that defies categorization. A tight sidecut, stiff flex, and nearly flat tail combine to provide incredible carving performance for a ski this wide. You’ll be amazed at the relentless edge grip, no matter the conditions. When the snow is soft, the fat tip with generous rocker easily planes over fresh powder, and the nanoMAG® Damping System lends a stable ride in even the most chopped-up crud. If you’re looking for a wide, hard-charging ski to handle any type of snow, the Brockway 100 is the perfect fit.
| Length (cm) | Dimensions (mm) | Turning Radius (m) | Mounting Setback (cm) | Weight (g/ski) |
| 186 | 143-100-124 |
19 - 20.9 |
-9 | 2150 |
| 180 | 143-100-124 |
17.5 - 19.25 |
-9 | 2035 |
| 174 | 143-100-124 |
16.5 - 18.2 |
-9 | 1975 |
- Tip rocker maximizes flotation in powder and busts through crud.
- Flat tail with minimal rise provides pop out of turns.
- Camber Pockets molded within the overall camber triple the turn initiation contact points for maximum edge grip on hardpack.
- Hybrid MidLight construction combines ash and poplar hardwoods with carbon fiber and triaxial fiberglass for a smooth and stable, yet energetic ride.
- nanoMAG® Damping System makes chatter on ice and choppy groomers a thing of the past.
- Full-height UHMW sidewalls bonded with eight layers of rubber are bombproof.
What length should I get?
The Brockway 100 has a rockered tip and a stiff flex. If you are between lengths, size up for stability at speed or size down for quicker turns. Check out our size chart for more info.
What bindings should I get?
You can use any binding on the Brockway 100 as long as the brake width is at least 100 mm wide. We run Marker Griffon bindings on our demo skis. Visit your local ski shop for bindings and mounting.
What can I customize?
Just about anything from graphics to construction!
Build your own custom pair at www.skishaggys.com/products/custom-skis
See all the options at www.skishaggys.com/pages/custom-skis
Have Questions? Get a consultation
What are Camber Pockets?
Camber Pockets are additional small sections of camber (about 4" long and 0.030" tall) molded into the overall camber of the ski in front of and behind your midsole position. They increase contact pressure to improve grip on hardpack and ice.
Are they tuned and waxed?
Skis come tuned with a 1° base edge bevel and a 2° side edge bevel and a slight tip/tail detune. The skis are waxed with a universal temperature wax to get you going.
Ride Notes: Stiff, powerful, precise, and aggressive. Haven't found a speed limit, can take anything I put in and the edge hold is unwavering.
Design Needs: Stiff flex - snappy/energetic rebound - damp/smooth on hardpack - float in powder - no speed limit
Purpose: Make an all mountain ski that can be driven like a race ski, but excel in a wide variety of conditions. Radius should split the difference between a slalom and GS ski. Give the ski enough backbone so everything you put in, you get out - make them a ski to be driven!
John Thompson
Skier Level: Expert | Brockway 100 Length: 180cm | Height: 5'10"
Premium Materials
Core
Laminated ash/poplar hardwood: Long grain premium white ash and tulip poplar are hand selected and cut into full-length strips. Strips are individually flex indexed and laminated together symmetrically. Each laminated core is CNC milled to a precise thickness profile developed for each model and length.
nanoMAG® Damping System
nanoMAG® magnesium sheets are inlaid into the wood cores. The unique characteristic of this material is its ability to dissipate mechanical energy into heat, with increased capacity as the material is moved faster.
Composites
Unidirectional carbon fiber strips above and below the core, triaxial fiberglass above and below the core, fiberglass binding mat underfoot. Rubber bonding strips placed along edges, sidewalls, and ends for rock solid bonding.
Bio-Based Epoxy
Entropy Super Sap® epoxy contains 28% bio-based content and is specifically designed for skis. It's formulated for high-strength and impact resistance, which creates a durable, tough, and lightweight composite.
Sidewall
Full-height UHMW - the same raw material as your base, bombproof and double chamfered for reduced swingweight.
Topsheet
Clearview gloss nylon with sublimated graphics and transparent windows to the wood core and carbon fiber strips.
Base + Edge
1.4 mm CNC Knife Cut 4001 Race Grade Durasurf sintered UHMW. 2.2 mm over-sized and heat-treated edges take a beating.
Why Shaggy's?
Every single pair of Shaggy’s is built at our small, wholly owned ski factory in Boyne City, Michigan. We source all of our materials as locally as possible and take no shortcuts during the build process, using the most modern equipment and methods to carefully craft our skis.
Cutting-edge technology, premium materials, and limitless customization are worthless if the end product isn’t built with passion. A love for skiing is a prerequisite for each and every employee at Shaggy’s. We design, prototype, and test every ski model before it’s made available to you, and that passion for skiing is clearly evident in our end product.
That exacting detail doesn’t end with your new skis; your experience as a customer is paramount to us as well. Our team is always happy to offer assistance - before, during, and after your ski purchase. Find out for yourself why we refer to our customers as the Shaggy’s Family.
Customer Photos
Add your photo
Customer Reviews
Got the Brockway 100 for use in the midwest and Colorado. They work well in the midwest unless the snow is all out hard pack then the carves are too hard to initiate due to the width. In Colorado they were great. Skied great in packed powder but excelled in powder. The 100's are great for out west but I would go with the 90's for the midwest.
Got these skis since it was time to replace my old Ahmeeks and I loved the design on them. When they came in, I was not disappointed. These skis look amazing and carve effortlessly, and work great for all different terrain. My favorite skis!
